53-1004105-13 Hardware Installation Guide
Brocade X6-8 Director
Hardware Installation Guide
Description
Installation
Quantity
1/4-20 x 1/2 in. (1.27 cm) panhead Phillips screw with thread locker (torque must
be set to 92 cm-kg [80 in.-lb])
For rack rails with square holes 16
3/8 in. (0.953 cm) alignment washer
For rack rails with square holes 16
NOTE
Depending on the device and installation, not all the parts may be used on the device type.
Figure 3: 14U Rack Kit Parts
1. Left rack mount shelf bracket
2. Right rack mount shelf bracket
3. 10-32 x 5/8 in. (1.58 cm) panhead Phillips screw and washer
4. 10-32 clip nut (for cabinets that have rails with round holes)
5. 1/4-20 x 1/2 in. (1.27 cm) panhead Phillips screw with lock washer (for cabinets that have rails with round holes)
6. 10-32 retainer nut (for cabinets that have rails with square holes)
7. 1/4-20 x 1/2 in. (1.27 cm) panhead Phillips screw with thread locker (for cabinets that have rails with square holes)
8. 3/8 in. (0.953 cm) alignment washer (for cabinets that have rails with square holes)
Assembling the Rack Hardware
Attach the left and right rack mount shelf brackets to the rack rails.
53-1004105-13
28
Broadcom
Summary of Contents for Brocade X6-8 Director
Page 207: ......
