16
Air 70 Rev. D
Chapter 6 Putting into operation
Green LEDs
INCREASE
$,548$17,7<
6.3 Setting the air quantity
Ex factory, the air quantity of the Air 70 is set at 25 m
3
/h. With
the aid of two push buttons, the air quantity can be set to
15 m
3
/h, 25 m
3
/h, 40 m
3
/h, 55 m
3
/h or 70 m
3
/h respectively.
Green LEDs indicate the ventilation mode for a short period
after operating the buttons; 10 seconds later these LEDs go
out again.
6.4 Reset factory settings
Holding down the two push buttons for at least 15 seconds will
reset the appliance to the factory settings. As soon as the push
buttons are released, all three LEDs will simultaneously blink
green 3x successively. All changed settings have now been re-
set to the initial values that the Air 70 came with ex factory. All
VWRUHGIDXOWPHVVDJHVKDYHEHHQGHOHWHGDQGWKH¿OWHUPHV
-
sage has also been reset.
>10 s.
>
15 m
3
/h
25 m
3
/h
55 m
3
/h
70 m
3
/h
40 m
3
/h
6.5 Other settings installer
9DULRXVRWKHUVHWWLQJVRIWKH$LUFDQDOVREHPRGL¿HG7KLV
requires use of the Brink service tool. An overview of settings
WREHPRGL¿HGFDQEHIRXQGLQ
Please refer to the manual that comes with the Brink service
tool for more detailed information and methods for modifying
these other Air 70 settings
Press the "+" button
and "-" button simul-
taneously 15 s.
+
-
+
-
3x
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
DECREASE
$,548$17,7<