manualshive.com logo in svg

Brink Air 70, Installation Instructions Manual, Page: 18 / 40

Share
Download
Brink Air 70 Installation Instructions Manual Download Page 18

14 

Air 70   Rev. D

5.5.4 Connecting optional  On/Off switch

If the Air 70 is connected to a permanent 230 V power source, 
the appliance - both the basic and the Plus versions - must be 
equipped with the optionally available two-pole On/Off switch.
It can be placed in the appliance on the left-hand side; a break-
out opening for this switch is provided.

At the location of this permanent power supply, a hole must be 

PDGHLQWKHZDOOEHKLQGWKHDSSOLDQFHIRUDMXQFWLRQER[7KH
H[DFW ORFDWLRQ RI WKH MXQFWLRQ ER[ LV LQGLFDWHG RQ WKH GULOOLQJ

template used to drill the holes from inside the unit (see §5.4 
item 4).

Refer to the installation instructions that come with this switch 
for the electric connection of this On/Off switch.

Control pcb

Breakout opening 

switches

Position junction box 

230 V

Chapter 5    Installation

5.5.5  Connecting MODBUS connector (only possible for Plus version)

The Air 70 supports the MODBUS protocol. 

A 3-pole (detachable) screw terminal X11 is available on the 
plus pcb for connecting a MODBUS link. MODBUS can be 
used to connect the appliance to a building automation system. 

MODBUS connector 

X11 on Plus pcb

Control pcb

Plus pcb

Summary of Contents for Air 70









































Reviews:

No comments