Air 70 Rev. D
7
Chapter 5 Installation
5.1 Installation general
Installing the appliance
1. Setting up the appliance (§5.2 and §5.4)
2. Electric connection (§5.5)
Connecting the mains power and, if necessary, the eBus
connection
Installation must take place in compliance with:
4XDOLW\UHTXLUHPHQWVYHQWLODWLRQV\VWHPVGZHOOLQJV
4XDOLW\UHTXLUHPHQWVEDODQFHYHQWLODWLRQGZHOOLQJV
5HJXODWLRQVIRUYHQWLODWLRQRIGZHOOLQJVDQGUHVLGHQWLDOEXLOG
-
ings
6DIHW\SURYLVLRQVIRUORZYROWDJHLQVWDOODWLRQV
$Q\DGGLWLRQDOUHJXODWLRQVRIWKHORFDOSRZHUFRPSDQLHV
7KH$LULQVWDOODWLRQLQVWUXFWLRQV
5.2 Setting up the appliance
The Air 70 can directly be mounted using the screws supplied
for that purpose.
In addition, the following must be observed.
7KHDSSOLDQFHPXVWEHPRXQWHGDWDSLWFKRIWRZDUGV
the outside.
7KHLQVWDOODWLRQURRPPXVWEHIURVWIUHH
7KHLQWHULRUDQGH[WHULRUFRYHUVPXVWEHOHYHO
7KHDSSOLDQFHPXVWEHFXWWRWKHFRUUHFWOHQJWKWRPDWFKWKH
wall thickness.
7RDOORZ¿OWHUFOHDQLQJDQGPDLQWHQDQFHDIUHHVSDFHPXVW
be provided of at least 70 cm at the front of the appliance
and a free headroom of 1.8 m.
'RQRWSODFHWKHDSSOLDQFHDERYHDZLQGRZRUGRRUEHFDXVH
droplets or icicles may form at the underside of the outdoor
cover.
5.3 Painting outlet grill front cover
If required, the outlet grill of the front cover can be painted in
a different colour. Standard colour is RAL 9003. The synthetic
outlet grille is made of PC/ABS; Consult your paint supplier for
the use of the correct type of paint.
Make sure that all holes of the outlet grill remain open!
Unscrew 8 screws on the inside to remove the outlet cover;
then the outlet grille can be removed from the front cover.
Outlet grille
8x) Torx T10
«
= Clean outdoor air into the dwelling
= Exhaust "foul" indoor air to atmosphere
A = Minimum height > 800 mm
B = Spacing > 100 mm
C = Spacing > 300 mm
D = Free space for appliance> 750 mm
«
«
«
A
B
C
C
D
B
B
C
C