Brillion Landcommander II LCS11152, Operator'S Manual

Page: 16 / 62

998rev401 5K821
To replace the bolt that holds the leaf spring
together, use the following procedure:
It is important that the tension on the leaf spring
be properly removed before replacing the bolt.
1. Relax the spring by installing the
service tool as outlined in steps 1-5
of the “Service Instructions” on page 13,
transfering the force of the spring to
the service tool.
2. With leaf spring completely relaxed ,
replace the bolt.
3. Retighten nuts. Torque inside
nut to 250 ft/lbs .
4. Follow the “Preload Instructions”
on page 13 to reload the spring.
Loosened
bolts
9 5/8”
Rear Cushion
•
Dimension of spring cushion on
rear beam is 9 5/8”.
Install service tool
Torque to
250 ft/lbs.
Page 12
998rev11-27-06