Briggs & Stratton 276535, Repair Manual

Page: 34 / 38

2-Cycle Snow Engine
Section 5 - Engine Assembly
Page 28
INSTALL MUFFLER
1. Install muffler with new gasket (Figure 83).
a. Torque screws to
80 ib-in. (9.0 Nm)
.
Fig. 83
INSTALL BLOWER HOUSING
1. Assemble a flat washer to each cylinder head bolt
stud (Figure 84).
2. Make sure ground wire is routed between outer
cylinder head fins.
Fig. 84
3. Assemble blower housing to engine.
4. Assemble ground wire, flat washers and locknuts
(Figure 85).
Fig. 85
5. Install front blower housing screws (Figure 86).
Fig. 86
6. Torque screws to
80 lb-in. (9.0 Nm)
.
7. Torque locknuts to
150 lb-in. (17.0 Nm)
.