Briggs & Stratton 276535, Repair Manual

Page: 25 / 38

2-Cycle Snow Engine
Section 4 - Engine Overhaul
Page 19
12. Install the throttle shaft into the carburetor
body as shown (Figure 53) .
Fig. 53
13. Push the throttle plate into the throttle shaft,
following the orientation noted during
disassembly. If the throttle plate does not fit
snugly, replace the throttle shaft. Rotate throttle
shaft to ensure plate (Figure 54) does not stick
or bind.
Fig. 54
14. Install the choke shaft into the carburetor body as
shown in figure 55.
Fig. 55
15. Push the choke plate into the choke shaft
following the orientation noted during
disassembly. If the choke plate does not fit
snugly, replace the choke shaft. Rotate the choke
plate to ensure that it does not bind or stick
(Figure 56).
Fig. 56