Briggs & Stratton 276535, Repair Manual

Page: 22 / 38

2-Cycle Snow Engine
Section 4 - Engine Overhaul
Page 16
6. Remove the decal on the side of the carburetor
and unscrew the pilot jet (Figure 42).
Fig. 42
NOTE:
The threads have Loctite™ on them.
7. Remove the fuel filter screen from the fuel nozzle
(Figure 43).
Fig. 43
8. Remove the float hinge pin , the inlet valve
needle assembly (with its clip) , and the float
(Figure 44). Discard the needle and clip.
Fig. 44
9. Inspect the float for cracks or deterioration of the
cork. Replace if necessary.
10. Remove the brass inlet seat and discard
(Figure 45).
Fig. 45