43
Installation
16.2 Reflective Glass Installation
To install the Eternal Flame Reflective Ceramic Glass liner:
1.
CAREFULLY remove the panel from the protective packaging.
2. DO NOT REMOVE THE REAR FIBER PANEL FROM THE FIREBOX
The following steps highlight the procedure for installing Eternal Flame Reflective Ceramic Glass liner. We recommend using clean
cotton gloves when handling panels. Handle the panels with care. Inspect the panels to ensure that no damage has occurred inside the
package. Please report any damage immediately to your Authorized Brigantia Dealer.
Before you begin:
•
Ensure the fireplace is OFF and cool before servicing the fireplace
• Ensure the gas supply is turned OFF and disconnect the power supply (including backup batteries)
•
Remove barrier screen (see
Section 6.3
)
•
Remove Glass Door (see
Section 6.4
)
Step 1:
Remove the top arched panel.
Step 3:
Place the reflective glass panel on the bottom spacers
and flat against the back wall of the fireplace.
Figure 16.2.01
Figure 16.2.03
Step 2:
Ensure the panel retainer clips and self tapping tek
screws included in the kit are accessible before continuing.
Figure 16.2.02
