54
Operation
Room Thermostat (Remote Operation)
The Remote Control can operate as a room thermostat. The thermostat can
be set to a desired temperature to control the comfort level in a room.
To activate this function:
•
Press the Thermostat Key. The LCD display on the remote will change
to show that the room thermostat is ON and the set temperature is now
active
•
To adjust the temperature, press the Up/Down Arrow Keys until the
desired temperature is displayed
SMART Thermostat (Remote Operation)
The Smart Thermostat function adjusts the flame height automatically in accordance to the difference between the set point and the
actual room temperature. As the room temperature approaches the set point, the Smart Function will modulate the flame down.
To activate this function:
•
Press the Thermostat Key until the word “SMART” appears to the right of the temperature bulb graphic
•
To adjust the set temperature, press the Up/Down Arrow Keys until the desired set temperature is displayed
NOTE
When the fireplace is started in Smart Thermostat mode:
1.
The fan will automatically activate 5min after ignition and shut down 12min after fire is turned off.
2.
Manual Flame height adjustment is disabled.
Figure 18.4.10:
Figure 18.4.11:
Dimmer Control (Light - not available on this fireplace)
This function is used to control the variable lights. To activate this function use
the Mode Key to index to the variable light icon.
The intensity of the output can be adjusted through six (6) levels. Use the
Up/Down Arrow Keys to adjust the output level. A single beep will confirm
reception of the command.
Figure 18.4.09:
