27
7.3.1.4 Mileage
Total Mileage
displays the total mileage of the vehicle once it
has been confirmed in mileage setup. The speed unit controls
whether this value is displayed in miles or kilometres.
Actual Mileage
is a field that is manually entered. Type the
current value mileage value once the MDR is installed.
Mileage Setup
is used to submit the mileage value to the MDR
memory, click confirm once you are happy with the value. Click clear
to zero the total mileage value. Prompts will display to ask for user
confirmation.
Mileage Figure 75
7.3.2
Snapshots
Snapshot refers to an image of the video data displayed on an MDR channel.
7.3.2.1 Time Snap
Time Snap
must be ticked to enable all the options. You can
have a maximum of 8 snap entries. By default, time snaps are
disabled.
Delete
removes a time snap entry. You cannot delete entry 1.
Snap Link Setup
is where your time snap is setup.
Start time
refers to the time you would like time snaps to start.
End time
refers to the time you would like time snaps to end.
There is no limitation of the number of snaps, but this uses the same
storage limit as recordings. If the storage is full, then the oldest snap
will be written over. Snaps are stored by vehicle registrations and
time.
When exporting snaps to a USB flash drive. A folder named
picture
found in the following path F:\MDR-504xx-500\
”vehicle
registration”\”date”\picture will be created.
Time Snap Figure 76
Channel
is the channel that would like to setup a time snap for.
Snap Enable
controls whether time snaps are enable for that
channel. To activate the other menu options, snap enabled must be
ticked.
Resolution
refers to the time snap resolution. The options are:
CIF, WCIF, HD1, WHD1, D1, WD1 and AHD (720p and 1080p). This
is dependent on the input resolution of the cameras connected to the
MDR.
Quality
represents the image quality of the snapshot. There are 8
levels. Level 1 is the best quality whereas level 8 is the lowest
quality. By default, this is 1.
Snap Count
refers to how many snaps will be taken. A maximum
of 3 snaps can be taken for a minimum of 5 seconds. By default, this
is 1.
Snap Interval
is the period between each snap which can be
between 5 and 3600 seconds. By default, this is 5 seconds.
Snap Link Setup Figure 77
7.3.2.2 IO Snap
Alarm Snap Link Setup
are used for taking snaps based on
triggered alarms only.
Mobile App / Web Snap Link Setup
is unused currently.
IO Snap Figure 78
Summary of Contents for MDR-504-500
