22
Username
obtain from your SIM card provider.
Password
obtain from your SIM card provider.
Access Number
refers to the dial up phone number needed to connect to
the network. By default, this is set to *99#
Certification
refers to the authentication mode, can be set to either CHAP
(Challenge Handshake Authentication Protocol) or PAP (Password
Authentication Protocol). CHAP should be chosen as this is a more secure
authentication protocol. This is chosen by the network operator.
SIM Phone Number
is not a required field. You may enter the phone
number of the SIM card found inside the MDR for future reference.
Mobile Network 2 Figure 52
7.1.5.5 Server
Centre Server
refers to the MDR Server PC. A maximum of 6 centre
servers can be saved.
Add
adds another centre server, a new blank page is displayed with a new
number.
Delete
removes the currently displayed centre server.
ON
enables the current centre server.
Protocol Type
refers to the protocol used by the MDR unit to send its data
(video and metadata) to the MDR Server. By default, this is set to MDR5.
Maintenance is not currently used.
Network Mode
refers to the network communication module used for to
communicate with the MDR Server. The options are Ethernet, Mobile Network
and Wi-Fi. This is discussed in further detail in
MDR 500 Series Network
Connectivity SW&Infrastructure Manual
. This can be found on the Brigade
website.
Server 1 Figure 53
MDR Server IP
Public IP address of the firewall which forwards any traffic
to the server PC or IP address of the server PC hosting the MDR Wi-Fi Server.
MDR Server Port
is used for device access to server. By default, is 5556.
Media Server IP
should be the same as MDR Server IP.
Media Server Port
should be the same as MDR Server Port. By default,
is 5556.
Server 2 Figure 54
7.2
Surveillance
7.2.1
Live View
7.2.1.1 Preview
Note:
The MIRROR and FLIP VERTICAL feature affects both the live and recorded views.
Live Audio
is used to send real-time
audio from a microphone enabled camera
to a speaker enabled monitor. By default,
this is disabled.
Image Setup
is used to control
BRIGHTNESS, CONTRAST, COLOUR
and SATURATION. By default, this is set
to mid-point (31). Each channel can be
setup individually. All Settings (except
mirror and flip vertical) can easily be
duplicated across all channels by using
the COPY TO button. A MIRROR
and
FLIP VERTICAL
button may also be
configured per channel.
Preview Figure 55
Image Setup Figure 56
Summary of Contents for MDR-504-500
