21
Obtain DNS Automatically
refers to the domain
name system. A DNS server takes the website
addresses that you type in and resolves them into the
actual IP address of the site. While MDR attempts to get
an IP address for itself from the DHCP server, it will
simultaneously attempt to resolve address.
Use Following DNS
the MDR will use these DNS
addresses regardless of what the DHCP server is using.
Preferred DNS Server
by default, this is
008.008.008.008.
Alternate DNS Server
by default, this is
008.008.004.004.
Ethernet 2 Figure 47
7.1.5.2 Ports
Web Port
is used for when a PC is connecting to the
MDR Ethernet page. If this is incorrect, the web page will
not open. By default, this is 80.
Ports Figure 48
7.1.5.3 Wi-Fi
These settings are dependent on your MDR model. This requires a wireless
MDR model.
Enable
is used to turn the Wi-Fi module off or on. Once enabled, the
settings found below will become active.
SSID
is the service set identifier. It is used to identify a wireless LAN and is
usually unique to an area. This is where you will enter the name of the wireless
network that the MDR will connect to.
Encryption
refers to protocols used to protect your network. MDR supports
WEP and WPA/WPA2. We suggest using WPA2, as it is the newest encryption
form and thus the most secure. This is case-sensitive.
Password
is the wireless network password, this should be entered
carefully as it is case-sensitive.
Wi-Fi 1 Figure 49
Static IP
is used to turn the Wi-Fi module off or on. Once enabled, the
settings found below will become active.
IP Address
refers to the internet protocol address of the Wireless module.
This address is used to join the wireless network.
Subnet Mask
is used to identify network address of an IP address. By
default, this is 255.255.255.000.
Gateway
helps route the network traffic.
Wi-Fi 2 Figure 50
7.1.5.4 Mobile Network
These settings are dependent on your MDR model. This requires a mobile
network MDR model.
Enable
is used to turn the mobile network module off or on. Once enabled,
the settings found below will become active.
Server Type
is an auto-populated field, indicates the mobile network
connection type.
Network Type
refers to the type of mobile network connection that is used
by the MDR to connect to the internet. Currently 4G is the fastest connection
speed.
APN
refers to Access Point Name. This information is dependent on your
mobile carrier network.
Mobile Network 1 Figure 51
Summary of Contents for MDR-504-500
