2.8. GPS receiver
.
Synchronisation with the «
GPS –
Module
»
Start up the Bricon Club
-
Master.
Select menu
-
option
“ 6.
Set Time
”
Press
< OK >
The following new menu is shown.
Not all of these options are active, i.e. the
“
Manual synchr.
”
is only active for those countries
where manual setting is allowed.
Press
< 1 >
to activate the GPS setting.
The following message then appears:
The module has two connectors (RS232 and PS2). Connect the RS232 to the back of the Master
(where you would normally connect the HKW or PC
-
cable) and connect the PS2 into the left hand
side of the master. The PS2 provides the power.
PS/2
RS 232
Fig. 2
Fig. 1
Fig. 3
GPS syncr.
Radio syncr.
Manual syncr.
Master
-
Timer
<C> Cancel
Set RTC from GPS
Connect GPS –
Module
PRESS <C> to cancel
BRICON CLUB
-
MASTER
7
