BRICON CLUB
-
MASTER
22
5.0. Linking chip rings.
5.1. Connect the master to the PC.
-
Make the correct connections as described in installation and assembling the CLUB
-
MASTER
(see pages 4, 5 and 6).
-
Start the BCE programme (refer to PC software and start BCE on pages 6 and 7).
-
Connect the power supply. In BCE you will see that the master is connected to the PC.
-
The first time that you start BCE you must connect the Club
-
Master. The master reads the
language and the country code. BCE is then ready to read fanciers or create new fanciers .
-
Attention : If you connect a new master you must set the correct club
-
ID (default 9999). It is
also necessary to connect the radio mother clock to set the correct date and time.
-
Connect the ETS clock to the Bricon Club
-
Master.
-
For Bricon ETS clocks, the Speedy can be connected directly into the docking station on the top
of Club
-
Master, whilst the Little Bricon is to be connected with the cable (male/male) provided to
the Unives
-
Bricon connection.
-
All other brands of ETS clock should be connected to the Bricon Club
-
Master by using the
Bricon Unives
-
box or Black Unives cable with a connection cable supplied by its own brand.
Serial port
USB port
Unives/
Bricon
connection
