3.6. Options.
Automatic Updates :
The Bricon Club Editor (BCE) programme will automatically check for the latest version of the
software. The PC on which the programme is running must be connected to the internet.
If these
‘
Automatic Updates
’
settings disturb the normal workings you can turn them off, but where
possible it is recommended to leave the settings on.
If
‘
Check for newer version
’
is selected then the program will check for the latest version.
If
‘
Download automatically
’
is selected, the latest version will be automatically downloaded to the PC.
If
‘
Install automatically
’
is selected, the downloaded version will be installed automatically.
It is very important that the PC is connected to the internet on a regular basis and the BCE started to
be sure of having the latest version of the Bricon software.
The latest version of the software will always be available from the Bricon website (www.bricon.be).
Localisation :
If you select automatically read the language and country from the master and you connect the master
as described, the program will read the language and country from the Club
-
Master. When you restart
BCE the language and country from the master will be filled in.
Attention
. BCE will start this function the first time. This is necessary for the controls of the region.
Port :
The master is connected with a serial cable or a USB cable. When the program starts, the PC checks
which port the master is connected to. You can also set the port manually.
If you have a USB connection you must stop the communication before you unplug the master.
Press
‘
ReInit communication
’
to start the communication.
BRICON CLUB
-
MASTER
18
