Read Rings:
To read rings BCE must by connected to the Club
-
Master
(see 4.3 connection).
Place the ring positioning plug in the basketing antenna
to position the ring on.
Reading the ring will take a few seconds so the exact
positioning of the ring is very important.
Go with the cursor to the first ring that you wish to link.
Press read ring and on the master you see
‘
Read ring
’.
The ring that is in the basketing antenna is read and
appears on the screen.
BCE will jump to the next ring in the list and you can
link that ring by placing a new ring in the basketing
antenna.
If the cursor is below the list, Read ring will stop.
By pressing <C> on the master, read ring will stop.
TIP: You can select the ring to be linked with the cursor
BRICON CLUB
-
MASTER
26
Important!!
When the clock of a fancier who is already in the list is downloaded to the BCE, the
existing data will be overwritten.
If additional rings are to be added to a fanciers clock using the BCE programme, first of
all download the data from the clock to the BCE. This ensures that it is the latest data that
will be edited, as it is possible that amendments may have taken place to the data on the
clock without these having been downloaded to the BCE.
After having added rings to the fanciers data on the BCE, the new data should be sent to
the fanciers ETS clock, to overwrite the old data.
Check Ring
:
Connect the master and press check ring.
Hold the ring that you wish to check in the master
antenna. BCE will then search for the ring in the
selected link table.
If the ring is present BCE will ask to delete or
preserve the link.
If the ring is not present, and the loft number and the
year is correct it is possible to link the ring.
