Bricon CLUB-MASTER, User Manual

Page: 28 / 36

BRICON CLUB - MASTER 28
Basketing
Read out
Progress Reading
Delete BR+
Setup
Set time
Select menu option 1 ‘ Basketing ’.
Press <OK>
Wincanton
Exeter
Alencon
Tarbes
Saintes
Select the race point with the
▼ and ▲ keys.
Press <OK> to confirm.
Tarbes tarb4242
Choose <OK> to print a Pool Sheet for
each competitor in the race
or <C> if a Pool Sheet is not required.
6. Unives 1.7
The Bricon Club - Master fully supports « Unives 1.7 ».
The “ Unives 1.7” protocol makes it possible for any alternative brand of electronic timing system
clock to basket birds and have clockings read out on the Bricon Club - Master.
How to proceed ?
Start the Bricon Club - Master and wait until the main menu is displayed.
Ensure that the radio - clock and printer are connected before you proceed.
Choose in the main menu Basketing or Read out. Follow the instructions on the screen, and a
message box ‘ UNIVES 1.7 Connect clock ’ will appear.
Connect the ETS clock to the Bricon Club - Master using the Bricon Unives - box or Black Unives
cable, and wait until the Club - Master recognises the ETS Clock.
The Bricon Club - Master continues to operate under Unives 1.7, and from then on all procedures
should be carried out directly on the variant brand of ETS clock taking care to follow the exact
instructions for marking and read out for that particular brand of clock.
If a Bricon clock is connected, then the instructions on the master display should be followed.
If the ETS clock doesn ’ t work properly you should contact the supplier of that particular system.
7. Basketing Races.
Prepare the Bricon Club - Master ready for Basketing:
1. You must initially connect the radio - frequency mother clock or GPS receiver (see page 6).
2. Connect the printer, press 6 in the menu ’ set time ’ and choose 1 ’ set time ’.
3. If you basket using any brand of ETS clock other than Bricon, you must also use the Bricon
Unives - box or the Black Unives cable.
4. Connect the power into the Bricon Club - Master (and Bricon Unives - box if necessary).
Some brands consume a lot of power while switching them on, therefore we recommend to
connect the power to the Unives box if you also have non - bricon clocks in the club.
5. The main menu appears on the display of the Bricon Club - Master.