6
Treadwall M6 Pro-V Owner’s Manual—2018
Operating Instructions
Speed Control
To control the speed of your climb you simply move
the lever up and down. At the “0” setting the
Treadwall will be completely stopped for most people
or it may just barely creep downwards for heavier
individuals. At speed “10” the wall is at its fastest and
only requires about 50 pounds of weight to move.
The ideal setting will be different for people of
different weights.
Accurate current and average speeds are displayed
on the counter in feet/min. or meters/min as required.
Angle Changing
The M6 Pro-V is a fixed angle unit:
however you can reset the angle with 10
minutes work. There are three options:
+5 degrees, vertical and –5 degrees.
To change the angle unbolt the four bolts
that attach the channels to the side
frames. A set of 9/16” wrenches are
used. Swing the wall into the new position
and re-bolt.
On each side there are two bolts at-
taching the frame to the channel
blocks: Remove the plastic covers and
using (2) 9/16” wrenched, un-bolt to
change angles. Re-bolt securely.
