ASSEMBLE THE SECOND SIDE
FRAME AND COMPLETE THE
ASSEMBLY AS SHOWN.
TIGHTEN THE TURNBUCKLES
EVENLY AND TIGHTLY, ADJUSTING
SO THAT THE TURNBUCKLES END
UP BEING THE SAME LENGTH.
ONCE THE TURNBUCKLES ARE
TIGHT, THE FRAME WILL BE RIGID.
POSITION THE FRAME IN ITS
FINAL LOCATION, AGAINST A
WALL.
FINISH AND POSITION FRAME ASSEMBLY
IT IS IMPORTANT THAT THE
TREADWALL REMAIN AGAINST A
BACKING WALL. THE WOOD PANEL
AT THE TOP HORIZONTAL IS
DESIGNED TO BE ATTACHED TO
THE WALL WITH APPROPRIATE
FASTENERS IF THERE IS ANY
POSSIBILITY THAT THE MACHINE
WILL MOVE AWAY FROM THE
WALL.
IF THE FLOOR IS HARD AND
SHINY, THE MACHINE CAN CREEP
OUT FROM THE WALL DURING USE.
IF THERE IS ANY CHANCE OF THIS
HAPPENING, ATTACH THE BOARD
TO THE WALL WITH APPROPRIATE
FASTENERS. IF THE FLOOR IS SOFT
- FOR EXAMPLE RUBBER OR
PADDED - THIS MAY NOT BE
NECESSARY.
Page 3
M6-V install manual
1-15-16
