ASSEMBLING MAIN CHAINS
Each Treadwall main chain come in two boxes that must be assembled to a full length chain using a
masterlink.
If the boxes are marked "short" and "long", use one short and one long for each chain. If the boxes are
unmarked, use any two boxes to make each chain.
Note that the ends of the chains are different as shown below. Attach the end of chain A with a single extra
link to the end of chain B that has five links. This will insure that the spacing between the chain tabs is correct
and uniform.
Also, make sure that the tabs are all facing the same direction as in the picture.
The masterlinks are located at one end of each length of chain.
Chain A
Chain B
Single extra link
Five extra links
Brewer's Ledge Inc.
800-707-9616
www.treadwall.com
CHAIN ASSEMBLY DRAWING REV .1
6-11-14
