Brew-Boss® V2.06 Operation Manual
The above image shows the first 12 steps of a typical BIAB brew session. The columns correlate to the
Step Parameters defined above. Study the table above to understand how to set up your own brew
session. The step by step walk through below of the basic BIAB process with this system will help
with understanding. Make sure to read the section later in this document that describes how the Brew-
Boss® system handles the mashing process before attempting to change the settings below. A thorough
understanding of the mash process is essential.
Step by Step BIAB Example
Step 1 – Fill kettle with water:
This is defined as a Step Type 1, prompt the user and require
confirmation, as indicated by the 1 in the first column under Step Type. The prompt is “Fill kettle with
water”. We are telling the user to fill the kettle with water to the desired water level for the recipe
being brewed. For this prompt step, all the parameters are set to 0, except the Speak parameter, which
is set to 1 indicating we want the controller to verbally enunciate the prompt to the user as well. In this
case, the controller will display the “Fill kettle with water” prompt in the prompt window on the
Brew-
Boss®
application (the application) screen and also verbally announce the same prompt to the user.
The application will then wait for the user to press the green “
Start
” button on the application screen
when he/she finishes adding water to the kettle. If the controller is in Auto Brew Mode, the controller
will proceed to the next step. Please note that for step type 1, the program automatically adds
”when
finished, press the green start key”
to the prompt.
Step 2 – Place cover on kettle and open the valve:
This is also defined as a Step Type 1, as we now
Page 31
