17
Chapter 2: Bed Cabinet assembly.
Chapter 2:
Bed Cabinet assembly.
REQUIRED TOOLS:
#2 Phillips Screwdriver
1: Stand
Hutch Left Side on edge, with baseboard notch in the air.
2: Attach the top assembly from previous step to side panel.
3: Attach
Hutch Mid Shelf, Hutch Bottom Shelf & Hutch Toe Kick.
4: Once all 12 cam fittings have been tightened, slide
Hutch Right
Side into place and tighten all cam fittings.
STEP 2
FIG. 2B
Make sure cam fittings are on the same side of the panels as shown on this page.
Attach
Hutch
Top Nailer onto
Hutch Top Shelf
and tighten cams.
STEP 1
FIG. 2A
OVERVIEW:
You’ll now assemble the Bed Cabinet on the floor
directly in front of the wall where the
bed will attach
, then tilt the unit up. To do this, you’ll need
at least 3 extra inches of height clearance
.
If the height of your room is shorter than this, you’ll have to assemble the Bed Cabinet vertically.
