29
Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet.
Chapter 5:
Attaching the Bed Face
Panel to the Bed Cabinet.
REQUIRED TOOLS
• 1/2” Socket
• 1/2” Wrench
REQUIRED HARDWARE
• Hardware Card #2
(mech. box)
• Springs
(mech. box)
For video instructions of this step, visit:
https://breda.us/springs
Referring to the chart and
the illustrations on this
page, insert springs into
the hole numbers noted
for the bed size you have.
1. Position the spring with the open side of the
hook facing down as shown in
green.
2. Hook it into one of the back side holes of
the mechanism slots as shown in
blue.
3. Rotate the spring 180° and hook the
opposite side into the corresponding hole
on the movable portion of the mechanism as shown in
orange
.
STEP 1
FIG. 5A - LEFT SIDE MECHANISM SHOWN
Important: You’ll need to rotate the mechanism arm forwards and/or
backwards as you go to keep tension on the springs you’ve inserted and to
create the proper spacing for the spring you’re working on.
FIG. 5B
FIG. 5C
FIG. 5D
Bed Size Spring Qty
Hole Numbers
Twin
4 per side Holes: 3, 4, 6 & 7 (skip 5)
Twin-XL 5 per side
Holes: 3-7
Full
6 per side
Hole: 2-4 & 6-8 (skip 5)
Queen
7 per side
Holes: 2-8
King
8 Per Side
Holes: 1-4 & 6-9 (skip 5)
Note: Some sizes skip hole #5 to
keep the spring pattern balanced.
Start adding springs toward to
the top of the mechanism fi rst and
work your way down, adjusting the
mechanism arm as you go to keep
tension on the existing springs.
