BRAYER BR2031, Instruction Manual

Page: 7 / 56

7 EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL OR
LABORATORY PURPOSES
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not need
any additional measures.
• Wipe the air fryer surface with a slightly damp cloth
and then wipe it dry.
• Take the handle (6) and remove the tray (8) with the
basket (7) (рис.1).
• Lift the protective cover (4), press the release button
(5) and remove the basket (7) from the tray (8) (pic. 2).
• Wash the basket (7) with warm water and neutral
detergent, rinse them and wipe dry.
• Install the basket (7) into the tray (8) until the lock
clicking (pic. 3).
• Install the tray (8) with the basket (7) into the air fryer.
Note: - If the drip tray is not fixed in the air fryer body,
the air fryer will not switch on, always make sure that
the tray (8) is installed properly.
Switching the air fryer on for the first time
• To remove any foreign odors, switch the air fryer on
with empty basket (7).
• Pull the power cord out from the cord storage (10)
without excessive effort.
• Insert the power plug into the mains socket, the
display (2) will light up.
• Press the «on/off» button « » (16), at the same
time, you will hear a sound signal and the display will
show the temperature «180°C» in digital symbols
(11), the temperature is set by default, the digital
symbols (14) will display the time «15: 00» set by
default.
• Press the «start/pause» button « » (17), the air
fryer will switch on and the symbols « , » (12,
13) will light up, the heating element operation
symbol « » (12) will periodically light up and go out,
which means that the set temperature is maintained
in during the air fryer operation.
• After 10 minutes you can press the «start/pause»