BRAYER BR2031, Instruction Manual

Page: 8 / 56

8 EN
button « » (17) and switch the air fryer off by
pressing the «on/off» button « » (16), unplug the
unit and wait for the air fryer to cool completely,
remove the drip tray (8), remove the basket (7) and
rinse it again.
Note:
- the control buttons (15, 16, 17, 18, 19) are
sensory, and you just need to touch a button, each
touch is accompanied by a sound signal.
- when using the unit for the first time, a foreign
smell or some smoke from the heating element
can appear - this is normal and it is not covered
by warranty.
USING THE AIR FRYER
ATTENTION!
- The air fryer is not intended for water boiling.
- During the operation of the air fryer, heat is
released and hot steam can escape from the
grid (9). Use appropriate precautions to prevent
the risk of burns, fires or other personal injury or
property damage.
- The air fryer heats up during operation and retains
heat for some time after it is switched off. Always
use potholders when working on hot surfaces and
let the metal parts cool down before cleaning the
air fryer.
- Be careful when removing cooked food from the
basket, always use cooking accessories designed
for non-stick surfaces when removing food.
• Install and use the air fryer on a flat, dry, steady and
heat-resistant surface with free access to the mains
socket.
• The gap between the wall and the back of the air fryer
body should be at least 20-30 cm, the distance from
the sides of the air fryer body should be at least 10-20
cm.
• Always check the condition of the hot air inlet and
outlet grids, otherwise the hot air circulation will be
interrupted, which can affect the cooking process or
damage the appliance.
• Take the handle (6) and remove the tray (8) with the
basket (7) (pic.1).
• Put the food products in the basket (7), do not
overload the basket (7) with products. Hot air
circulation is necessary for proper cooking, so it is not
recommended to fill the basket (7) more than 2/3 full.
When you fry fresh vegetables, do not put into the
basket (7) more than 3 cups of the products.
• Insert the tray (8) into the air fryer body, make sure that
the tray (8) is installed properly otherwise the air fryer
will not switch on.
• Pull the power cord out from the cord storage (10)
without excessive effort.
• Insert the power plug into the mains socket.