36
Replace Rear Brake Disk:
(1) Release the black connector of the motor cord
………………
(Picture 1)
(2) Cut off the band (Picture 1)
(3) Release three screws on the motor cord cover (Picture 1)
(4) Release two nuts for the motor shaft (Picture 2)
(5) Release the rear caliper so can remove the motor (Picture 2)
(6) Release three screws on the brake disk so can remove the disk
(7) Follow with the reversed steps to restore
＜
Tools
＞：
(2) diagonal cutting pliers
；
(3) screwdriver
；
(4) open-end wrench
（
24mm
）；
(5) Y-bend socket wrench
（
12mm
）；
(6) hex-key wrench
（
6mm
）
(Picture 4)
Three screws on the disk
Summary of Contents for EVT-4000e
