10
(4) MAIN CONTROL CORD
Replace Main Control Cord :
(1)
Release three screws on the handle cover, two mounting screws on the instrument panel,
three screws on the head light, three screws on the front cover and two screws on the right
trim
………………
(Picture 1 & 2)
(2)
Release all of the connectors stored inside the handle cover
………………
(Picture 3)
(3) Release all of the connectors stored inside the front cover
………………
(Picture 4)
(4) Release all of the connectors stored inside the right cover
………………
(Picture 5)
(5) Follow with the reversed steps to restore
＜
Tools
＞：
(1) screwdriver
(Picture 1)
Three screws on
the handle cover
Three screws on the
front cover
Summary of Contents for EVT-4000e
