38
(12) REAR LIGHT ASSY
Replace Rear Light:
Release three screws on the tail comp
………………
(Picture 1)
(1)
Release four screws on the trim on each left and right side
…………………
(Picture 2)
(3) Release the screw on the center cover
…………………
(Picture 3)
(4)
Release three screws on the side cover on each left and right side
…………………
(Picture 2)
(5)
Release two screws on the tail fender
…………………
(Picture 2)
(6) Follow with the reversed steps to restore
＜
Tools
＞：
(1) hex-key wrench
（
6mm
）
& Y-bend socket wrench
（
10mm
）；
(2) (3) (4) screwdriver
；
(5) T-bend socket wrench
（
10mm
）
(Picture 1)
Tail comp
Three screws on the tail comp
Summary of Contents for EVT-4000e
