34
(11) MOTOR AND BRAKE DISK
Replace Motor:
(1) Release the black connector of the motor cord
………………
(Picture 1)
(2) Cut off the band
………………
(Picture 1)
(3) Release three screws on the motor cord cover
………………
(Picture 1)
(4) Release two nuts for the motor shaft
………………
(Picture 2)
(5)
Release the rear caliper so can remove the motor
………………
(Picture 3)
(6) Follow with the reversed steps to restore
＜
Tools
＞：
(2) diagonal cutting pliers
；
(3) screwdriver
；
(4) open-end wrench
（
24mm
）；
(5) Y-bend socket wrench
（
12mm
）
(Picture 1)
Motor cord
Three tie bands on the
main cord
Three screws on the
motor cover
Summary of Contents for EVT-4000e
