19
(7) FRONT FORK AND REAR
SHOCK ABSORBER
Replace Front Fork:
(1)
Release three screws on the front cover
………………
(Picture 1)
(2)
Release six screws on the front fender
………………
(Picture 2)
(3)
Release three screws on the glove box
………………
(Picture 3)
(4)
Release clamping screw for the handle
………………
(Picture 4)
(5)
Release front axle nut to remove the wheel
………………
(Picture 5)
(6)
Release two screws on the caliper
………………
(Picture 6)
(7) Release two screws on the front fork and check the steel balls to see if they are
missing
………………
(Picture 4)
(8) Properly adjust the front fork clearance and follow the reversed steps to restore
＜
Tools
＞：
(1) (2) screwdriver
；
(3) T-bend socket wrench
（
8mm
）
& screwdriver
；
(4) box wrench
（
14mm
）
；
(5) box wrench
（
17mm
）
；
(6) Y-bend socket wrench
（
12mm
）；
(7) special wrench
Summary of Contents for EVT-4000e
