25
(8 ) BRAKE HOSE FRONT & REAR
Replace Front Brake Hose:
(1)
Release three screws on the handle cover
………………
(Picture 1)
(2)
Release two screws on the right reservoir
………………
(Picture 2)
(3)
Release the screw on the brake hose of the front wheel, avoid fluid leaking to the
pad
………………
(Picture 3)
(4)
Release the screw on the right side brake hose
………………
(Picture 2)
(5)
Release three screws on the front cover
………………
(Picture 4)
(6)
Cut off the band, and then pull out the hose slowly
(7)
Follow with the reversed steps to restore
<
Tools
>:
(1) (2) screwdriver
;
(3) (4) box wrench
(
12mm
);
(5) screwdriver
;
(6) diagonal cutting pliers
(Picture 1)
Three screws on the
handle cover
Summary of Contents for EVT-4000e
