Bravi Platforms Sprint LUI MINI P.A., Manual

Page: 23 / 39

3.11 TRANSPORT PROCEDURES
HOISTING AND TIE DOWN
General Information
The LUI PKI and LUI MINI P.A. may be transported to the workplace
with one of the methods described below:
•
Driving the vehicle and completing the journey on the base
wheels, the surface to be travelled permitting.
•
Moving it with a fork lift truck, positioning the forks in the places
indicated, found in the base of the frame.
Transport on a fork lift truck
Position the forks of the truck in the points indicated on the vehicle. This
allows the machine to be transported to the work area or to lift it to an
upper level by way of a standard fork lift.
NOTE:
The fork lift truck must be capable of sustaining the gross weight of the
machine. See the operational technical specifications of the machine, at
the beginning of the section.
Transport vehicle - tie down strapping
With the machine turned off on the transport vehicle in position for tie
down (brakes set) , follow the directions indicated for tying it down during
transport.
IF EXCESSIVE FORCE IS EXERTED WHEN TYING DOWN THE VEHI-
CLE (LOAD ON THE WHEELS) COMPONENTS OF THE REAR DRIVE
WHEELS OR OF THE FRONT CASTOR WHEEL ASSEMBLIES MAY
BE DAMAGED.
Tie the machine down onto the transport vehicle with suitable strapping,
having them run through the railings of the basket and avoiding the entry
gate doors.
3.12 ADHESIVE STICKER POSITIONS
44 45
SECTION 3.
OPERATION OF THE MACHINE