Bravi Platforms Sprint LUI MINI P.A., Manual

Page: 19 / 39

3.7 GROUND COMMAND PANEL
For LUI PKI the panel is found under the cover, in an extractable fold - away
drawer, and is made up of the following components;
For LUI MINI P.A. the panel is in the front of the chassis, with their relative
functions;
1. Emergency Stop Button
2. Battery charger indicator
3. Multifunction Button Group
4. Battery Charger socket
5. LCD display
6. Up(6a) and down(6b) lifting push buttons basket
7. Battery gauge
3
4
6a
LUI PKI
LUI MINI P.A.
6b
2
6a
6b
1
1
5-7
Emergency stop button
Pushed immediately stops all the operational phases of the machine.
Reset DOES NOT actuate the machine, but enable the command devices.
Display( for LUI PKI)
This is the principle control display system on LUI PKI.
•
It visualises useful information on the status of the system
•
It gives diagnostic information on eventual anomalies or faults in the
system.
Multifunction Button Group:
All of the arrow buttons are enabled only when the keyed selector switch is
turned to the Ground Command mode.
•
The ESC button is used for the programming of the electronic hard-
ware and MUST BE used only by a specialised BRAVI technician.
•
Pushing and holding down the up arrow button , the raising of the bas-
ket is actuated.
RELEASE TO INTERRUPT THE ELEVATION OF THE BASKET.
36 37
SECTION 3.
OPERATION OF THE MACHINE