SECTION 3.
OPERATION OF THE MACHINE
3.1
THE MANUFACTURER HAS NO DIRECT CONTROL WHATSOEVER ON
THE APPLICATION OR THE OPERATION OF THE MACHINE.
THE USER AND THE OPERATOR ARE HELD TO FOLLOW THE COR-
RECT SAFETY PROCEDURES.
This section provides information necessary for the comprehension of the
operational command functions.
3.2 DESCRIPTION OF THE MACHINE
The order picker is a truck with an elevating operator position intended for
picking operations (manual picking and storage of goods from shelves);
The main command panel is located on the platform.
This lifting device is an electrical, self
-
propelled (LUI PKI) or push around
(LUI MINI P.A.) vehicle and it is equipped with an aerial work platform,
mounted on a strut elevation mechanism, actuated by a special single hy-
draulic cylinder with a synchronised effect.
From the platform command panel, the operator may drive the vehicle (only
for LUI PKI) and lift up or lower the platform. The LUI PKI is equipped with
an electrically actuated cargo lift area controlled by two easily accessed
buttons located on the side of the machine, which allow the operator to
raise and lower the cargo platform, which is reserved only for objects and
materials, without leaving his or her position.
The LUI MINI P.A. is equipped with a manually actuated cargo lift area con-
trolled by an easily lever located underneath the cargo shelf, which allow
the operator to raise and lower the cargo platform, which is reserved only
for objects and materials.
The LUI PKI has two drive wheels in the rear and two castor wheels in
front.
It is necessary to use the ground programmable command station panel
when the machine is being serviced or functional verifications are per-
formed or in case of emergency, if the operator on the platform is not capa-
ble of lowering it.
The LUI MINI P.A. has two free castor wheels in the rear and two self brak-
ing wheels in front. It is necessary to use the ground command station
when the machine is being serviced or functional verifications are per-
formed or in case of emergency, if the operator on the platform is not capa-
ble of lowering it.
NEVER MANOEUVRE THE LUI MINI P.A. WITH A PERSON INSIDE THE
BASKET
3.
Slope alarm limit
: with the platform completely lowered, drive the
vehicle on a slope greater than 1.5° in any direction
(not exceeding
its nominal operational capacity on a grade).
The alarm of the vehi-
cle will indicate a sloped condition in the event of an attempt to raise
the platform.
4.
Transmission speed reduction limit:
If the platform is raised for
more than 0.4 m (1.5
-
2 ft), the transmission velocity is reduced by 1/4
compared to the transmission speed for the lowering of the platform
( only for LUI PKI)
5.
Platform gate opening limit:
The entry gate is equipped with springs
on both of its wings that automatically close the entry gate as soon as
they are released.
6.
Left/right handle and footswitch sensor
-
The machine operates (it
moves and it is raised) exclusively if the operator keeps his or her
hand resting on the left and right side handle (pic.A) and with both
heels pressing on the footswitches positioned on the platform (pic.B).
This safety position is to be maintained throughout all operations of the
machine (only for LUI PKI)
7.
Make sure that all the machine functions have been
disabled when the emergency stop button is activated (pressed).
18
19
A
B
SECTION 2.
PREPARATION AND INSPECTION
Summary of Contents for Sprint LUI MINI P.A.
Page 25: ...48 49 SECTION 5 GENERAL TECHNICAL SPECIFI CATIONS AND OPERATOR MAINTENANCE...
Page 26: ...50 51 SECTION 5 GENERAL TECHNICAL SPECIFI CATIONS AND OPERATOR MAINTENANCE...
Page 33: ...SECTION 7 7 2 HYDRAULIC SCHEME LUI PKI 6 6 64 65...
Page 34: ...SECTION 7 7 3 HYDRAULIC SCHEME LUI MINI P A 66 67...
