3.3 FUNCTION OF THE MACHINE
Preliminary Operations
Before activating the machine using the commands on the ground station
panel or those on the platform, it is necessary to satisfy the following com-
mand conditions.
•
Battery voltage must be sufficient for operation. The battery dis-
charged alarm does not necessarily have to be present either on
the ground command panel, or on the battery status indicator
found on the side of the vehicle (only for LUI PKI).
•
The key switch on the basket command station panel must be set
either on the ground command mode or on the platform command
mode.
•
The emergency stop buttons, on the command panel of the plat-
form and on the ground command panel must be in RESET posi-
tion (extended outward).
•
For LUI PKI: the LCD screen on which the status of the machine
may be visualised on the ground command panel must indicate
normal operational conditions upon turn
-
on of the machine.
•
FOR LUI PKI :the machine operates, (it moves and lifts) only if the
operator has his or her hand on the left and right sensor handle
and both heels pressing down on the foot switches on the platform.
This safety position is to be maintained at all times during opera-
tion. PICs. A and B section 2.6)
1.
Ground Command Panel (Section 3.7)
2.
Manual Descending Emergency Lever (Section 3.8)
3.
AC power supply for battery charger and charge status LED (Section
3.6)
4.
Platform foot switch (2 switches, one for each foot)
-
(Section 3.6)
5.
Platform Entry Gate
6.
Platform Command Panel (Section 3.6)
7.
Materials handling compartment
20
21
SECTION 3.
OPERATION OF THE MACHINE
4
7
1
-
2
-
3
LUI PKI
LUI MINI P.A.
5
5
1
-
2
-
3
7
6
6
Summary of Contents for Sprint LUI MINI P.A.
Page 25: ...48 49 SECTION 5 GENERAL TECHNICAL SPECIFI CATIONS AND OPERATOR MAINTENANCE...
Page 26: ...50 51 SECTION 5 GENERAL TECHNICAL SPECIFI CATIONS AND OPERATOR MAINTENANCE...
Page 33: ...SECTION 7 7 2 HYDRAULIC SCHEME LUI PKI 6 6 64 65...
Page 34: ...SECTION 7 7 3 HYDRAULIC SCHEME LUI MINI P A 66 67...
