3.4 BOOT
-
(TRANSPORT PLATFORM)
Removal
1.
Lift the boot in correspondence to the back part (column) so as to
free bumper on the base frame. Therefore have the boot slide forward
while lifting it to completely detach the boot from the vehicle.
Installation
1.
Position the boot on its relative bumper on the upper part of the
frame and have it slide backwards.
THE BOOT (TRANSPORT PLATFORM) MUST BE USED EXCLU-
SIVELY FOR CARGO MATERIALS.
PREVENT TRANSIT OF PERSONNEL ON THE TRANSPORT PLAT-
FORM BOOT.
Boot Right
Side - Cargo Lift Plat-
form
3.5 BATTERY CHARGING
Battery low voltage alarm warning light
On the LUI PKI command panels on the platform and the ground station
have indicators of low battery voltage.
On LUI MINI P.A. frame section has the indicator of low battery voltage.
Battery charging procedure
This machine is equipped with a battery charger with an AC electrical power
input/DC electrical power output. The battery charger stops charging the
batteries automatically when they have reached full charge.
NOTE:
When the battery charger is connected to an AC electrical outlet, the
platform vehicle transmission is disabled.
THE LEAD ACID BATTERIES MAY GENERATE EXPLOSIVE HYDROGEN
GAS DURING NORMAL OPERATION. KEEP SPARKS, OPEN FLAMES
OR LIT TOBACCO AT A SAFE DISTANCE FROM THE BATTERIES.
DURING BATTERY CHARGING PROVIDE FOR ADEQUATE VENTILA-
TION IN THE AREA. DO NOT CHARGE A FROZEN BATTERY. CARE-
FULLY STUDY THE PRECAUTIONS SPECIFIED BY THE BATTERY
MANUFACTURER RELATIVE TO THE SPEED OF CHARGING RECOM-
MENDED AS WELL AS THE POSSIBILITY OF REMOVAL OF THE
CELL CAPS DURING CHARGING.
1.
Park the vehicle in a well ventilated area near an AC wall socket.
2.
Always use a grounded (earthed) AC socket. Connect the bat-
tery charger to a correctly installed AC socket with ground connection
according to all of the local regulations in force. The grounded socket
is necessary so as to reduce the risk of electrical shocks
-
do not use
grounded adapters and do not modify the plug. If an extension is
used, avoid excessive drops in voltage by using the 3 wire 12 AWG
type.
ATTENTION
22
23
SECTION 3.
OPERATION OF THE MACHINE
Summary of Contents for Sprint LUI MINI P.A.
Page 25: ...48 49 SECTION 5 GENERAL TECHNICAL SPECIFI CATIONS AND OPERATOR MAINTENANCE...
Page 26: ...50 51 SECTION 5 GENERAL TECHNICAL SPECIFI CATIONS AND OPERATOR MAINTENANCE...
Page 33: ...SECTION 7 7 2 HYDRAULIC SCHEME LUI PKI 6 6 64 65...
Page 34: ...SECTION 7 7 3 HYDRAULIC SCHEME LUI MINI P A 66 67...
