Zone Screen
The
Zone Screen
gives more information about a zone. Here, the user can see each relay
configured to that zone and each sensor configured to that relay. Sensor icons will display the
current gas concentration value. As with the
Home Screen
, the zone concentration values will
change colors depending on the setpoints. All of the zone alarm information is available under
“Alarm Settings”. By pressing the left and right arrows at the edges of the display, the user can
easily navigate between zones without needing to go back to the
Home Screen
. However,
pressing the “Back” button in the upper left corner or the “Home” button in the upper right
corner will return the panel to the
Home Screen
. Tapping on a relay will open the
corresponding
Relay Screen
.
Relay Screen
The
Relay Screen
shows more information about an individual relay. This includes the zone to
which the relay is assigned, the average gas concentration of all sensors assigned to the relay,
the activation type, the setpoints, the override status, and the relay level. Tapping the arrows
on either edge of the display will allow the user to see other relays without going back to the
Zone Screen
.
IOM03
Rev 1.1 – May 18, 2021
26
