Passcode Entry Screen
Upon pressing the “Settings” icon, the user will be asked for a passcode. This passcode is
assigned at the factory and included in the packaging with every order. Entering the passcode
will allow the user to make changes to the system. After 5 minutes of inactivity, the panel will
automatically return to the
Home Screen
and the passcode will need to be reentered. If the
passcode is lost at any time, please contact the factory.
Settings Menu
The
Settings Menu
is where any changes to the control panel configuration will be made.
Under settings, a user can assign or remove sensors, relays, zones, and analog outputs,
configure the date and time, set up BACnet communication, or perform a system reset. The
control panel will come from the factory with the customized configuration specified at the time
of order so it should not be necessary to change settings during installation. For more detailed
information about the settings, see page 30.
IOM03
Rev 1.1 – May 18, 2021
27
