Brainlab CRANIAL/ENT OPTICAL TRACKING Instrument User Manual Download Page 90

Page: 90 / 112

Step

Secure the adapter by hooking the buckle over the notch, making sure to lock the catch

④

If applicable, drape the probe and adapter.

How to Attach the Unique Fit Aloka Adapter Base

①

②

⑤

⑥

④

③

Figure 47

Step

Slide either the

Adapter Base for UST 987/9104/9120 (Aloka)

Ultrasound Integra-

tion Adapter Base (Aloka UST-9133)

①

over the probe

②

. Make sure that the ball on

the probe

③

fits in the hole on the base

④

Secure the adapter by closing the clip

⑤

, making sure to tightly lock the catch

⑥

If applicable, drape the probe and adapter.

How to Attach the Adapter Array to the Adapter Base

①

②

③

Figure 48

Step

Place the sterile array onto the draped adapter base

①

. Align the array so that the teeth

of the adapter array match the indentations of the adapter

②

Securely tighten the fixation nut by turning it clockwise

③

NOTE: If you remove the adapter array from the probe, the adapter array and the drape become
unsterile. To continue navigation, a new sterile drape and a new sterile adapter array must be
used.

NOTE: If the drape between the adapter base and the adapter array is wrinkled, smooth it by
hand before mounting the tracking array.

Attaching the Unique Fit Adapter Base to the Probe

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING
















































































































Search results

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

Reviews:

Brands by name

Popular brands

Brainlab CRANIAL/ENT OPTICAL TRACKING, Instrument User Manual

Search results

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

Reviews:

Brands by name

Popular brands