manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Instrument User Manual

Share
Download
Brainlab CRANIAL/ENT OPTICAL TRACKING Instrument User Manual Download Page 13

2 INSTRUMENTATION

OVERVIEW

2.1

Instrument Overview

Further Information

Detailed instructions on the use of instruments with their respective software is provided in your

Software User Guide

.

Compatibility

Instruments can only be used with systems or other instruments that have been specified by
Brainlab as compatible. Contact Brainlab support if you are unsure of instrument compatibility.

Correct Handling

Before use, always ensure that each instrument is correctly assembled and all components are
tightly connected and/or locked, if necessary.

During use, regularly check that all instrument components have remained securely attached and
have not become dislodged or damaged. Any movement of fixed instruments during or after
patient registration results in inaccurate navigation, posing a risk to the safety of the patient.

Warning

The instruments described in this user guide are highly accurate and sensitive medical
devices and must be handled with extreme care. If you drop or otherwise damage an
instrument, or if an instrument is corroded or defective in any way, immediately call your
local Brainlab service provider for instructions on how to proceed. Failure to do so and
continued use of a damaged device may lead to serious injury to the patient.

Warning

If you suspect a reference array has been moved or damaged at any time after registration,
immediately stop and verify the array again. Changing an array’s position after registration
disturbs the entire measurement coordinate system, posing a risk to the patient.

Warning

If you suspect an instrument calibration has become inaccurate immediately stop and
verify/validate the instrument again.

Warning

Verify devices you suspect inaccurate on known anatomical landmarks or using the ICM.
Replace inaccurate devices or return them to Brainlab for further inspection/testing.

INSTRUMENTATION OVERVIEW

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

13

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands