manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Instrument User Manual

Share
Download
Brainlab CRANIAL/ENT OPTICAL TRACKING Instrument User Manual Download Page 46

4.4.3

Z-touch Laser Pointer Technical Information

Storage

Always store the pointer in the relevant compartment of the supplied protective case when not in
use. Make sure to lock it to prevent unauthorized use. Remove the battery when the pointer is not
used over more than six months to prevent the battery from leaking.

MR Conditional

Non-clinical testing has demonstrated the 

Z-touch

 is MR Conditional. It

can be safely used in the MR environment under the following conditions:

• MR environment with 1.5 or 3.0 Tesla scanner

• To prevent autonomous acceleration, do not move 

Z-touch

 across the 5

Gauss (0.5 mTesla) line.

•

Z-touch

 may only be used in an MR environment with a 5 Gauss (0.5

mTesla) line clearly indicated on the floor surrounding the MR scanner.

• Do not use or activate 

Z-touch

 during an MRI examination.

MR-induced malfunction testing with device exposure to the clinical level
static field B

0

, the time-varying gradient field (dB/dt) and the RF field (B1,

E) in 1.5 Tesla and 3.0 Tesla MR systems passed all tests according to
Brainlab testing procedure.

After use, always store 

Z-touch

 in the provided storage case outside the

MR environment.

Possible Side Effects

The eyes are probably the only area which can be damaged by the laser beam of 

Z-Touch Laser

Pointer

. The most likely side-effects following exposure are:

Side Effect

Explanation

Flash blind-
ness

Temporary vision impairment, possibly lasting several minutes, which occurs af-
ter exposure to a bright light.

After image

Perception of spots in field of vision. This may last several minutes, even sever-
al days in severe cases.

Glare

Reduction or complete loss of sight in central field of vision due to exposure to a
direct or scattered beam. Once the laser beam is out of the field of view, the
glare ceases.

Dimensions, Weight and Material

Dimension

Value

Height

4.4 cm

Length

22.2 cm

Width

3.8 cm

Weight

160 g

Material

PC/ABS blend (polycarbonate/acrylonitrile butadiene styrene)

Z-touch Laser Pointer Technical Information

46

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands