Brainlab CRANIAL/ENT OPTICAL TRACKING Instrument User Manual Download Page 105

Page: 105 / 112

9.2

Draping

About the Draping Procedure

The draping procedure maintains the surgeon’s sterile field and provides a sterile barrier between
the patient and the microscope.

Warning

Perform draping with extreme care so that the surgeon can perform microscope navigation
as required without compromising the sterile field.

Warning

Test the range of motion to ensure that microscope movement will not damage the drape.

How to Attach the Array to the Adapter

Figure 59

Step

Attach the

Microscope Tracking Array

to the

Microscope Adapter

Place the

Microscope Tracking Array

on the draped

Microscope Adapter

so that the

teeth match.

Tighten the fixation screw and ensure that the connection is secure.

Warning

Ensure that the marker spheres can be screwed onto the pin until there is no gap between
the marker sphere and the base of the pin.

MICROSCOPES

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

105

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING
















































































































Search results

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

Reviews:

Brands by name

Popular brands

Brainlab CRANIAL/ENT OPTICAL TRACKING, Instrument User Manual

Search results

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

Reviews:

Brands by name

Popular brands