Brainlab CRANIAL/ENT OPTICAL TRACKING Instrument User Manual Download Page 64

Page: 64 / 112

Reference Arm (Mayfield Headholder) with too much weight (i.e., do not lean on it, or place
instrumentation on it).

NOTE: Keep the central tension screw tightened during registration and navigation to protect the
inner mechanism from liquids.

Checking Accuracy

To ensure safe and accurate navigation, check tracking system accuracy after reattaching the

Standard Cranial Reference Array

Warning

Avoid touching the device during surgery. This may cause inaccuracies and endanger the
patient.

Regularly check navigation accuracy to ensure that accuracy does not diminish during the
procedure.

How to Attach the Reference Arm to the Headholder

①

②

③

④

Figure 25

Step

Make sure that the patient’s head is rigidly fixed in the headholder.

Attach the connector of the

Vario Reference Arm (Mayfield Headholder)

②

to the head-

holder

③

and fix it tightly using the T-screw

①

NOTE: If you are using the optional V-inset, connect it to the headholder, and then attach
the reference arm to the V-inset connector

④

Make sure that the teeth on both components are properly interlocked, and that the surfa-
ces are parallel to each other.

Warning

Plan your OR setup prior to surgery. The camera must have an unobstructed view of the
reflective marker spheres and infrared LEDs on Softouch.

NOTE: Position the array so that it is out of the surgeon’s way, close to the planned craniotomy
and visible to the camera.

Attaching Arm to Headholder

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING
















































































































Search results

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

Reviews:

Brands by name

Popular brands

Brainlab CRANIAL/ENT OPTICAL TRACKING, Instrument User Manual

Search results

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

Reviews:

Brands by name

Popular brands