manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Instrument User Manual

Share
Download
Brainlab CRANIAL/ENT OPTICAL TRACKING Instrument User Manual Download Page 69

5.5.2

Assembly and Attachment

Introduction

The following sections describe how to assemble the 

Skull Reference Base

 and attach it to the

skull and additionally, how to attach the sterile and unsterile reference arrays.

Before You Begin

Warning

The surgeon is responsible for the fixation and placement of the base and must ensure that
the device is mounted rigidly on the patient’s head.

Warning

The surgeon must be aware that essential structures could be injured during placement.

Warning

Only use the screws and screwdriver approved by Brainlab. Using other screws can result
in severe patient injury and inaccurate navigation.

For patients with a high bone density, predrilling could facilitate screwing and avoid screw
breakage. If you decide that predrilling is necessary, it should be performed according to
the screw manufacturers guidelines. The diameter of the drill bit used for predrilling should
not exceed 1.1 mm, with a 5 mm stop to avoid piercing the skullcap.

The base should be placed in such a way to avoid covering important structures needed
for surface registration.

REFERENCES

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

69

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands