manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Instrument User Manual

Share
Download
Brainlab CRANIAL/ENT OPTICAL TRACKING Instrument User Manual Download Page 55

5.1.1

Positioning Arrays

Optimizing Array Visibility

The system recognizes a reference array by the geometrical arrangement of its marker spheres.
The angle for best detection of the array is perpendicular to the plane through the centers of all
marker spheres in the array. Take this into account when attaching a reference array to the patient
or adjusting its angle to the camera.

①

②

Figure 18  

No.

Geometrical Arrangement

①

Optimal

②

Least effective

Final Preparation Before Registration

Tightly screw marker spheres by hand onto the attachment pins of the reference array.

During Use

Check regularly that the marker spheres remain tightly screwed onto the pins.

A new registration is required if the patient was repositioned after registration.

Warning

Do not move a reference array relative to the patient’s anatomy during the procedure.
Changing the array position alters the entire measurement coordinate system, endangering
the patient.

Warning

To avoid unintentional movement of the reference array, do not place pressure on it.

REFERENCES

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

55

Summary of Contents for CRANIAL/ENT OPTICAL TRACKING

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands