UM25001C
Enters the setup mode to configure each BTC-2500. Choose FULL for FUNC,
485 for COMM, RTU for PROT and select an unequal address ( ADDR ) for each
unit. Use the same values of BAUD, DATA, PARI and STOP for BTC-2500's,
SNA10B and BC-Net. Also refer to
and
.
Section 2-15
Section 4-8
Enters the setup mode to configure each BTC-2500. Choose FULL for FUNC,
485 for COMM, RTU for PROT and select an unequal address ( ADDR ) for each
unit. Use the same values of BAUD, DATA, PARI and STOP for BTC-2500's,
SNA10B and BC-Net. Also refer to
and
.
Section 2-15
Section 4-8
Taking the advantage of BC-Net software, the operator can monitor the
process on the PC screen, program the set point as well as other control
parameters such as PID values, down load the ramp and soak profile to the
controllers, execute the manual control or trigger an auto-tuning.....etc. , and
print out a report as required. The historical data can be saved in the floppy
disc, hard disc or a CD for permanent storage purpose.
Taking the advantage of BC-Net software, the operator can monitor the
process on the PC screen, program the set point as well as other control
parameters such as PID values, down load the ramp and soak profile to the
controllers, execute the manual control or trigger an auto-tuning.....etc. , and
print out a report as required. The historical data can be saved in the floppy
disc, hard disc or a CD for permanent storage purpose.
Setup
Setup Menu
Setup Menu
FUNC
COMM
PROT
ADDR
BAUD
DATA
PARI
STOP
FUNC
COMM
PROT
ADDR
BAUD
DATA
PARI
STOP
97
