Brainchild BTC-2500, User Manual

Page: 39 / 142

2 18 Programming Port 2 18 Programming Port
See Figure 1.3 in Section 1-3 to find the programming port location. See Figure 1.3 in Section 1-3 to find the programming port location.
Programmer
connector and
ATE connector
inserted here Programmer
connector and
ATE connector
inserted here
Access hole
on the
bottom view Access hole
on the
bottom view
The programming port is used for off-line automatic setup and testing procedures only.
Don't attempt to make any connection to these pins when the unit is used for a normal
control purpose. The programming port is used for off-line automatic setup and testing procedures only.
Don't attempt to make any connection to these pins when the unit is used for a normal
control purpose.
Figure 2.23 Programming
Port Wiring
Figure 2.23 Programming
Port Wiring
I N P T 1
Switch Unit
DMM
Calibrator
Programmer
P11A Programmer
P11A
SW6400
HP 34401A HP 34401A
Fluke 5520A Fluke 5520A
UM25001C
NOTE
39
1
ON
DIP
23
4