Bradford White Copper Brute II BWCH 2000, Installation And Operating Instructions Manual

Page: 16 / 104

Page 12
B
RADFORD
W
HITE
listed in Figure 12 and Figure 13.
Additional parts may be packed inside the unit.
1.7 The Installation Kit (
installation parts box
).
The Indoor Brute is shipped in a single crate with the
Installation Kit.
Check the contents of the Installation Kit with the items
Figure 12. Standard Installation Components
Figure 13. Additional Components, depending on model size.
80/105
150
199/210
285 399 500 600 750/850
Flow Switch Kit
(flow switch, 2 wires, and an NPT tee)
1 1 1 1
Exhaust Adapter Assembly
1 1
Grid Screen, Venting
2 2 2
Vent Adapter, 6” PVC to 6” Stainless Steel
1
NPT Pipe (for flow switch)
1 1 1 1
Grommets for flow switch wires
2 2 2 2
Doc ument Bag
(all documents in one bag)
Term inal Block Jumper
(the Terminal Block Jumper is in the document bag)
Sen sor Kits
(Tank, Outdoor and System Sensors, all in the
same bag (2 boxes, a sensor, and a wire).
Volume Water Heaters will not have an Outdoor Sensor
Air I ntake Terminal Assembly
(elbow and a screen)
Vent Pipe
Exh aust Terminal Assembly
(end pipe and a screen),
Tem p/Pressure Gauge Kit
(a bushing, an NPT Tee, and the gauge in a small box)
Some accessory items
may be shipped in
separate packages.
Verify receipt of all
packages listed on the
packing slip. Inspect
everything for damage
immediately upon
delivery, and advise the
carrier of any shortages
or damage. Any such
claims should be filed
with the carrier.
The carrier, not the
shipper, is responsible
for shortages and
damage to the
shipment whether
visible or concealed.
Optional Indoor Pump Kit