Bowflex SelectTech BF1090, Owner'S Manual

Page: 9 / 40

7
The chart to the right is a quick reference to determine the
amount of weight offset to one side of the dumbbell.
The indicates the amount of offset weight on the
heavier side of the dumbbell.
Although you can continue to increase the amount of weight
offset, it is not generally necessary to offset the weight more
than 20 lbs.
Difference Offset
5 lbs + 2.5 lbs
10 lbs + 5 lbs
15 lbs + 7.5 lbs
20 lbs + 10 lbs
25 lbs + 12.5 lbs
30 lbs + 15 lbs
35 lbs + 17.5 lbs
40 lbs + 20 lbs
The Bowflex ® SelectTech ® Dumbbell is a very low
maintenance product. However, there are steps that you
should take to keep the product performing and looking its
very best.
1. Should your SelectTech ® Dumbbell handle assembly, plates
or base become soiled you may clean them with a rag
lightly dampened with warm water and a small amount of
mild soap. Wipe dry with a separate rag.
2. The SelectTech ® Dumbbell is internally lubricated and
will not require further internal lubrication. The contact
between weight plates and selection discs is not lubricated
but has naturally low friction. This generally will not require
any lubrication. Should you feel it necessary to lubricate
the weight plates and/or selection discs, use only a silicon
lubricant, preferably “food grade”.
Bowflex
®
SelectTech
®
Dumbbell Maintenance
Do not use any solvents, harsh detergents,
chemicals or bleach on this product − doing so
may damage the materials, resulting in degradation
of the product’s performance or strength.
Do not attempt to disassemble the dumbbell
handle or base assembly. These items are not
designed to be user serviced. Doing so will
void the manufacturer’s warranty. Contact your
Bowflex
® retailer or Nautilus, Inc. directly for
service.